WINTERWARM Knitting Pattern: Detailed Instructions for Creating a Cozy Hat and Scarf Set with Alpaca Wool

WInTER WARM

Pattern illustration

WINTERWARM is a set consisting of a hat with a hat band and a matching scarf. Size: Hat circumference 54/56/58/60 cm, scarf about 155 cm long (without fringes) and 22 cm wide Difficulty: O O O All knitting techniques that might not be known by everyone, are explained step by step in the appendix. @ Magische Maschen Heidrun Liegmann, 2014

Material

For this set I used: Ferner Crazy Chain (50% alpaca, 50% wool, 35m / 50g, internationally available at www.jawolle.com Hat and scarf are made with Crazy Chain in two contrasting colors. The hat is knitted very tightly, so it will keep in shape. It stillstays very soft and cuddly. The scarf is knitted side-to-side, with large needles.

Pattern illustration

For the hat you'll need: 3 x 50 g Ferner Crazy Chain color 116 - main yarn, main colorMc 1 x 50 g Ferner Crazy Chain color 135, for hat circumference of 60 cm you'll need 2 x 50 g - contrasting yarn, contrastingcolor Cc The hat is knitted very tightly, so it will keep in shape. For the scarf you'll need: 5 x 50 g Ferner Crazy Chain color 135 - main yarn, main colorMc 3 x 50 g Ferner Crazy Chain color 116 - contrasting yarn, contrasting colorCc 1 circular knitting needle 6.0 mm, at least 80 cm long 1 circular knitting needle 8.0 mm, at least 120 cm long a crochet hook 8.0 mm for the cast-on of the scarf and for adding the fringes

Gauges:

Crazy Chain with needles 6.0 mm in stockinette stitch: 12 stitches and 20 rows = 10 x 10 cm Crazy Chain with needles 8.0 mm in garter stitch: 9.5 stitches and 20 rows = 10 x 10 cm

HAT WINTERWARM

Instructions:

Take Crazy Chain in MC and the circular knitting needle and knit the beginning of the hat according to the instructions in the technical part.

Knitting sequence for the crown of the hat:

Instructions between asterisks \* \* are repeated until the end of the round.

RoundInstructionsStitchnumberattheendofthe round
5Knitallstitches.24
6Doubleevery3rdstitchbyKFB= * knit 2 stitches,double 1 stitchbyKFB *32
7Knitallstitches.32
8Doubleevery4thstitchbyKFB= * knit3stitches,double1stitchbyKFB 3*40
9Knitallstitches.40

10 *Doubleevery5thstitchbyKFB= knit4stitches,double1stitchbyKFB 8*48
11Knit allstitches.48
12Doubleevery6thstitchbyKFB= knit 5 stitches,double 1 stitch by KFB *56
13Knitallstitches.56
14Doubleevery7thstitchbyKFB= * knit6stitches,double1stitchbyKFB 8*64
15Knit allstitches.64

The next round is knitted differently, depending on the size you want to knit! According to the gauge (12 stitches = 10 cm) we calculate the total stitches we need for the head circumference. To give the hat a proper fit, we subtract 2 to 3 stitches for every size.

Head circumferenceNumberofstitches accordingtothe gaugeNumberof stitchesforthe hatInstructionforthe16thround
54cm65 stitches63stitchesKnittogetherthefirst2stitches,thenknitupto theendoftheround.
56cm67stitches65stitchesDouble the first stitch by KFB, then knit up to theendoftheround.
58cm70stitches67stitchesDoublethe1st,22nd and43rd stitchbyKFB, knitallotherstitchestotheendoftheround.
60 cm72stitches69stitchesDouble the1st,13th,25th,38thand51ststitch byKFB,knitallotherstitchestotheendofthe round.

Pattern illustration

= end of increases for the hat crown.

Pattern illustration

Knit 13 round in stockinette stitch, until the hat is high enough to begin the hat band. With the 14th knit round, knit together some stitches according to the table. This round is the last round in MC before changing to CC, therefore make a yarn-over before knitting the round and knit together the last stitch of the round and the yarn-over by SSK (see technical appendix).

Head circumferenceNumber of stitchesforthe hatNumber of hatstitches after decreasingInstructionsforthe14thRound
54cm63 stitches60Knittogetherthe1st/2nd,21st/22nd,41st/42nd stitch,knitallotherstitchestotheendoftheround.
56cm65stitches62Knittogetherthe1st/2nd,22nd/23rd,42nd/43rd stitch,knitallotherstitchestotheendoftheround.
58cm67 stitches64Knittogetherthe 1st/2nd,22nd/23rd,44th/45th stitch,knitallotherstitchestotheendoftheround.
60cm69 stitches66Knittogetherthe1st/2nd,23rd/24th,45th/46th stitch,knitallotherstitchestotheendoftheround.

Hat band:

Pattern illustration

Cut MC. The hat band is knitted with CC in garter stitch in rounds. In order to get garter ridges, we have to knit and purl alternating rounds - knit 1 round, purl 1 round makes a garter ridge. If you don't want to get a "step" at the beginning of each round, please work the changes of color and pattern rounds according to the instructions in the technical appendix. Knit a total of 12 rounds with CC, alternating 1 knit round and 1 purl round, so that you can see 6 garter ridges. Cut CC and knit 2 more rounds with MC - please knit the color change according to the explanations in the technical appendix.

Hat brim:

Knit the color and pattern changes according to the explanations in the technical appendix to prevent visible "'steps" between the garter ridges.

RoundInstructions
1Increase1stitchafterevery5thstitchbym1increase(pickinguptheyarnofthe previousrowas ayarn-over and knitting it throughtheback loop).
2-6Knit5roundsinstockinettestitch.
7Increase1stitchafterevery5thstitchbym1increase(pickinguptheyarnofthe previousrowasayarn-overandknittingitthroughthebackloop).
8-11Knit4roundsinstockinettestitch.
12Increase1stitchafterevery5thstitchbym1increase(pickinguptheyarnofthe previous row as a yarn-over and knitting it through the back loop).
13Purl1round.Beforepurlingtheround,makeayarn-over.Purltogethertheyarn-over withthelaststitchoftheround.LeavetheMConthewrongsideofthefabric.

14TakeCC andknit1 round.Beforeknittingtheround,make ayarn-over.Knittogether the yarn-over with the last stitch of the round.
15WithCCpurl1 round.Beforepurlingtheround,make ayarn-over.Purl together the yarn-over with thelast stitchof the round.Cut CC.
16Pick up MC andknit 1 round.Beforeknitting theround,make a yarn-over.Knit together the yarn-over with the last stitch of the round by usingSSK.
17With MC purl 1 round and cast-off. Before purling the round,make a yarn-over.Purl together the yarn-over with the last stitch of the round. Cast off all stitches purlwise.

Sew in all yarn ends. Moisten the hat and pull it into shape, best block it on a hat stand and let it dry there.

Pattern illustration

WINTERWARM STRIPY SCARF

Pattern illustration

The scarf is knitted alternately in garter stitch (knit RS row, knit WS row) and stockinette stitch (knit RS row, purl ws row). All segments in MC are knitted in garter stitch, all segments in CC are knitted in stockinette stitch. Every time you change color, cut yarn with a tail of approx. 20 cm long. Start the new yarn with a tail of approx. 20 cm as well. These yarn ends will get included into the fringes. If you have to start a new ball of yarn, try to start it on the right edge or on the left edge of the fabric. The leftovers will get used for fringes later.

Instructions:

With MC cast on 150 stitches. For a nice edge, use the crochet cast-on by crocheting around the knitting needle - it is explained in the technical appendix. Crochet cast-on 149 stitches, then put the crochet loop onto the knitting needle as 150th stitch. Knit the stripes according to the table:

Stripe 1main yarn MCKnit 6 rows(=3 ridges) ingarter stitch.Cutyarn.
Stripe 2contrastingyarnCcKnit2rowsinstockinettestitch.Cutyarn.
Stripe 3main yarn MCKnit4rows(=2ridges)ingarter stitch.Cutyarn.
Stripe 4contrastingyarnCcKnit2rowsinstockinettestitch.Cutyarn.
Stripe 5main yarn MCKnit 2 rows (= 1 ridge) in garter stitch. Cut yarn.
Stripe 6contrastingyarn CCKnit4rowsinstockinettestitch.Cutyarn.
Stripe 7mainyarn MCKnit 2 rows (= 1 ridge) in garter stitch. Cut yarn.
Stripe 8contrasting yarn CCKnit 4 rows in stockinette stitch. Cut yarn.
Stripe 9mainyarn MCKnit 2 rows (= 1 ridge) in garter stitch. Cut yarn.
Stripe 10contrasting yarn CCKnit 2 rows in stockinette stitch. Cut yarn.
Stripe 11mainyarnMCKnit 4rows(=2 ridges) ingarter stitch.Cutyarn.
Stripe 12contrastingyarnCcKnit2rowsinstockinettestitch.Cutyarn.
Stripe 13main yarn MCKnit 6 rows (= 3 ridges) in garter stitch. Cast off all stitches knitwise. Cut yarn.

Pattern illustration

Take the remaining yarn and cut fringes of approx. 30 cm length. You will need about 26 fringes in MC and 16 fringes in CC. Knot the fringes to both scarf ends by using the crochet hook, as is explained in the knitting technique appendix. 1. Fold the fringe double. 2. Pull through until fringe forms a loop. 3. Pull both fringe ends through this loop. If the scarf edge shows the MC, add a MC fringe. If the scarf edge shows the CC, add a CC fringe. Include the yarn ends on the scarf's edge into the fringes. Cut the fringes evenly.

Pattern illustration

KNITTING TECHNIQUE

Knitting technique for the hat - starting the hat and KFB increase

① Make a yarn loop shape into the yarn end, the end is on the right side, the yarn ball is on the left side.

Pattern illustration

② With the knitting needle, go BELOW the yarn of the yarn loop and catch yarn. Keep holding the yarn loop and the yarn end.

Pattern illustration

③ Pull through. On the knitting needle, you can see 1 stitch loop. Keep holding the yarn loop and the yarn end.

Pattern illustration

④ Make a yarn-over from front to back on the working needle. On the knitting needle, you can see 2 stitch loops now. Keep holding the yarn loop and the yarn end.

Pattern illustration

With the knitting needle, go BELOW the yarn of the yarn loop and catch yarn. Keep holding the yarn loop and the yarn end.

Pattern illustration

Pull through. On the knitting needle, you can see3 stitch loops now. Keep holding the yarn loop and the yarn end.

Pattern illustration

Make a yarn-over from front to back on the needle. On the knitting needle, you can see 4 stitch loops now. Keep holding the yarn loop and the yarn end.

Pattern illustration

⑧ Pull the needle tip forward so that the 4 stitch loops glide onto the needle rope. Keep holding the yarn loop and the yarn end.

WINTERWARM

Pattern illustration

Pull the needle rope to the shape of a loop. (= magic loop) With the knitting needle,go BELOW the yarn of the yarn loop and catch yarn. Keep holding the yarn loop and the yarn end.

Pattern illustration

Pull through. On the knitting needle, you can see 1 new stitch loop. Keep holding the yarn loop and the yarn end.

Pattern illustration

Make a yarn-over. On the knitting needle, you can see 2 new stitch loops. Keep holding the yarn loop and the yarn end.

Pattern illustration

2 Make 1 more stitch by leading the knitting tip BELOW the yarn loop, and make 1 more yarn-over. On the knitting needle, you can see 4 new stitch loops. Keep holding the yarn loop and the yarn end.

Pattern illustration

③ Pull the needle tip forward so that the 4 stitch loops glide onto the needle rope. Don't pull the needle rope too far, there still has to be a loop between the first 4 stitches and the second 4 stitches.

1st round:

Pattern illustration

① Shift the first 4 stitches onto the left needle tip. The rope builds a large loop. The second 4 stitches are on this loop.

Pattern illustration

② Knit these 4 stitches. There is a rope loop right to these 4 stitches and a rope loop left to these 4 stitches.

WINTERWARM

Pattern illustration

③ Pull the needle tip again, so that the 4 knitted stitches slide onto the rope. Pull the needle rope into a loop, turn the knitting clockwise and shift the second group of 4 stitches onto theleft needle tip. Knit these 4 stitches.

Pattern illustration

We have knitted one round over all 2 times 4 stitches = 8 stitches that we had cast on into the yarn loop. "Magic loop" means that we pull a circular needle to loops. By doing this, we can knit in the round on a circular, even with very few stitches.

2nd round:

Pattern illustration

① For the second knitted round, shift the first 4 stitches onto the left needle tip. In this round we are going to double each stitch by knitting it first through the front loop and again through the back loop = KFB (knit front back increase).

Pattern illustration

② Knit the first stitch, but leave the old stitch on the left needle tip.

Pattern illustration

③ Put the right tip back into the stitch, this time into the back loop. Knit the stitch, then slip the old stitch from the left needle tip.

Pattern illustration

You havedoubled the stitch. By using KFB, you made 2 new stitches out of 1 old stitch.

Pattern illustration

Double each of the 4 stitches by KFB = 8 stitches.

Pattern illustration

Pull forward the right needle tip so that the 8 stitches slide onto the rope. Pull the rope into a loop. Shift the 4 stitches of the second side onto the left needle tip. Double each stitch by KFB.

Pattern illustration

At the end of the round, both sides show 8 stitches each - a total of 16 stitches is on the circular.

3rd round:

Pattern illustration

Knit 1 round over all 16 stitches = Shift the 8 stitches of the second side onto the rope, pull the rope into a loop, turn the knitting clockwise. Shift the8stitches of thefirst half onto the left needle tip, then knit these 8 stitches. Shift the 8 stitches that you have just knitted onto the rope, pull the rope into a loop, turn the knitting clockwise. Shift the 8 stitches of the second half onto the left needle tip, then knit these 8 stitches. You have knitted a round over all 16 stitches with magic loop on a circular needle.

4th round:

Pattern illustration

In the 4th round, we will double every 2nd stitch by KFB = \*knit 1 stitches, double 1 stitch by KFB\*. Repeat until the end of the round. Place a marker at the beginning of the round Knit both "halfs" of the round by using magic loop.

Pattern illustration

Pattern illustration

You can close the hole at the beginning during this round. Take the start end on the back of the fabric ... ... and pull it tight: the hole in the middle is closed up gapless, all 8 start stitches lie on the yarn loop. Knit on with magic loop according to the instructions for the knitting sequence in the respective pattern. When you have got more stitches, one rope loop at the beginning of the round will suffice.

Knitting technique for the hat - making a m1 increase

Pattern illustration

① Knit up to and including the last stitch before the increasing position.

Pattern illustration

② With the right needle tip, pick up the yarn of the previous row that joins this stitch to the next one. Put it on the left needle as a yarn-over from front to back.

Pattern illustration

③ Knit this yarn-over through the back loop.

Pattern illustration

④ This way the yarn-over is half twisted, there will be no visible hole.

Knitting technique for the hat - changing colors and pattern in rounds

Changing colors:

The first and the last round of the respective color are closed by making a yarn-over before beginning of the round. This yarn-over is knitted together with the last stitch of the round. ① First round in a new color: Make a yarn-over before beginning the round, before the marker. ② The last stitch of the round is knitted together with the yarnover. In knit rounds, stitch and yarn-over are knitted together. In purl rounds, stitch and yarnover are purled together.

Pattern illustration

Pattern illustration

Pattern illustration

③ The beginning of the color change becomes (nearly) invisible.

Pattern illustration

Last round in this color: Make a yarn-over before beginning the round, before the marker.

Pattern illustration

Pattern illustration

The last stitch of the round is knitted together with the yarnover by SSK. = Put the knitting tip into the last stitch as if to knit, slip the stitch to the right needle without knitting it. = Slip

Pattern illustration

Put the knitting tip into the yarn-over as if to knit, slip the yarnover to the right needle without knitting it. = Slip

Pattern illustration

Put the left needle tip through both slipped stitches from left to right, from front to back.

WINTERWARM

Pattern illustration

Knit both slipped stitches together through the back loop. = Knit

Pattern illustration

By doing this, you close the last row of the respective color. The color change doesn't create a "step".

Changing pattern:

How to make the change of pattern (nearly) invisible, depends on the patterns you knit. You knit garter stitch in rounds by alternating 1 knit round and 1 purl round. ① Knit the knit round without any yarn-over and knit-together (only if it is the FIRST round in a new color, knit as is described in changing color!).

Pattern illustration

② Before beginning the purl round, make a yarn-over, then purl the round up to the last stitch.

Pattern illustration

③ Purl together the last stitch and the yarnover.

Pattern illustration

④ The change of pattern is (nearly) invisible, there is no "step" at the beginning of the round.

Knitting Technique for the scarf - Crochet cast-on

The crochet cast-on makes a tidy and firm lower edge. It works exactly like the provisional cast-on by crocheting around the knitting needle, but it is worked with the original yarn for knitting.

Pattern illustration

① Take the crochet hook into your right hand and the knitting needle into your left hand. Make a slip knot into the yarn and place the slip knot loop onto the crochet hook.

Pattern illustration

② Put the yarn over the knitting needle from front to back. Catch yarn with the crochet hook behind the knitting needle.

Pattern illustration

③ Pull the yarn through the loop with the crochet hook - you have crocheted a chain stitch around the knitting needle. On the knitting needle, you can see one stitch loop. Keep the crochet loop on the crochet hook!

Pattern illustration

Put the yarn over the knitting needle from front to back again ...

Pattern illustration

... and catch the yarn with the crochet hook behind the knitting needle. Pull it through the crochet loop on the crochet hook.

Pattern illustration

We have got 2 stitches on the knitting needle. The loop stays on the crochet hook!

Pattern illustration

Repeat steps 4 to 6 until you have one stitch less than you need.

Pattern illustration

) Put the crochet loop onto the knitting needle as last stitch.

Pattern illustration

You'll get twisted stitches by this method of casting on. In the first row, knit those stitches through the back loop.

Knitting Technique for the scarf - Knotting fringes

Pattern illustration

① Fold the yarn end for the fringe double.

Pattern illustration

② Take the crochet hook and put it through an edge stitch, from below to above. Pull the fringe loop through with the crochet hook.

Pattern illustration

③ Pull the fringe into a loop.

Pattern illustration

④ Take both yarn ends of the fringe and pull them through this loop.

Pattern illustration

Pull the knot tight, pull on both yarn ends evenly.

Pattern illustration

if there is a yarn end on the edge of the scarf, include it into the fringe. Pull the fringe loop through the edge stitch by using the crochet hook.

Pattern illustration

Pull both fringe ends and the yarn end on the edge through the fringe loop.

Pattern illustration

⑧ Pull the knot very tight, it will hold the yarn end of the edge as well.

Pattern illustration

if there are two yarn ends on the edge of the scarf, knot them into a fringe.

Pattern illustration

Cut all fringes to equal length. This design and the pattern tutorial are under German and International copyright law. I therefore forbid copying, editing, translation, publishing and any way of using it in electronic or printed form without my prior, explicit written permission. It is an instruction for private use only. Any commercial use commercial use as using it to offer courses, workshops, yarn kits or finished objects for sale is forbidden without my PRlOR written permission. ks, please contact me by e-mail: Heidrun@magischem @ Magische Maschen Heidrun Liegmann, 2014

Similar Design Patterns