Kinley's Crochet Cable Hat
Size Chart: Size 1: 6-12 months Size 2: 1-2 years Size 3: 3 years-small adult Size 4: large adult Supplies: Size G (4.25MM) crochet hook 100 grams worsted weight yarn (I use $100\%$ cotton yarn) Tapestry needle Gauge: 8 stitches and $8\,\mathrm{rows}=2$ inches in half double crochet
Notes:
· In this pattern, the ch2 at the beginning of the round does not count as the first stitch. You may find crochet instructions on the internet. I only provide the stitch abbreviations for you, and instructions for two special stitches used in this pattern.
Abbreviations:
Chain (ch), Slip Stitch (sl st), Single Crochet (sc), Half Double Crochet (hdc), stitch (st), stitches (sts), Cable (cable), Front Post Double Crochet (fpdc), Front Post Treble Crochet (fptc), and Back Post Single Crochet (bpsc).
Special Stitch Instructions:
Back Post Single Crochet (bpsc)
A bpsc is basically the same thing as a bpdc, you just do a single instead of a double. Insert hook from back to front to back around post of corresponding stitch below, yarn over and pull up loop, yarn over and draw through two loops on hook.
Cable: (Works using posts of next 4 stitches): Skip 2 stitches, fptc around post of next two stitches, fptc around post of first skipped stitch (the skipped stitch on the right), fpt around post of next skipped stitch.
Size 1 Pattern:
Foundation: ch4, join with sl st in first st to make a ring. Round 1: 7 hdc in ring, join to first st with a sl st. (7 sts) Round 2: ch2, \*fpdc and hdc in next 7 sts, join with sl st to ch2 space. (14 sts) Round 3: ch 2, \*fpdc in first st, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (21 sts) \*\*Make sre you ae liningu thefp with te fe in the prevous ow the second fpdc will be in the hdc of the previous row.\*\*\*\* Round 4: ch2, \*fpdc in first 2 sts, fpdc and hdc in next st. Repeat from \* around, join with a sl st to ch2 space. (28 sts) Round 5: ch2, \*fpdc in first 3 sts, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (35 sts) Round 6: ch 2, \*fpdc in first 4 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (42 sts) Round 7: ch 2, \*fpdc in first 4 sts, 1 hdc in next st, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (49 sts) Round 8: ch 2, \*work cable (see special stitch instructions) using first 4 sts, 1 hdc in next 2 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (56 sts) Round 9: ch 2, \*fpdc in first 4 sts, 1 hdc in next 4 sts. Repeat from \* around, join with sl st to ch2 space. (56 sts) Round 10-11: Repeat Round 9 Round 12: ch2, \*work cable using first 4 sts, 1 hdc in next 4 sts. Repeat from \* around, join with sl st to ch2 space. (56 sts) Round 13-15: Repeat Round 9. Repeat rounds 12-15 until hat measures 5 inches.
Edge and Brim Instructions (Size 1):
EDGE INSTRUCTIONS:
Round 1-3: Ch2, bpsc (see special stitch instructions) in each st around. Join with sl st to ch2 space. (56 sts)
BRIM INSTRUCTIONS: BRIM INSTRUCTIONS:
Row 1: Ch1, sc 23 sts, turn Row 2: sl st across 23 sts, turn Row 3: sc through rows 1 and 2 (through the sc and sl st) turn Row 4: sl st across, turn Row 5: sc through the previous 2 rows (through the sc and sl st) turn Row 6: sl st across, turn Row 7: sc through the previous 2 rows, DO NOT TURN
FINAL EDGING ROUND:
Row 9: sc down the left edge of the brim, continue to sc evenly around the entire back edge of the hat, continue to sc up the right side and across the front of the brim end with a slip stitch into the first sc of this round. Fasten off . Try not to crochet the last round too tightly as it will not have enough give around the head. To finish: Cut yarn and fasten off. Weave in the ends with a tapestry needle.
Size 2 Pattern:
Foundation: ch4, join with sl st in first st to make a ring. Round 1: 7 hdc in ring, join to first st with a sl st. (7 sts) Round 2: ch2, \*fpdc and hdc in next 7 sts, join with sl st to ch2 space. (14 sts) Round 3: ch 2, \*fpdc in first st, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (21 sts) \*\*\*Make sure you are lining up the fpdc with the pde in the previous row, the second fpdc will be in the hdc of the previous row.\*\*\*\* Round 4: ch2, \*fpdc in first 2 sts, fpdc and hdc in next st. Repeat from \* around, join with a sl st to ch2 space. (28 sts) Round 5: ch2, \*fpdc in first 3 sts, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (35 sts) Round 6: ch 2, \*fpdc in first 4 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (42 sts) Round 7: ch 2, \*fpdc in first 4 sts, 1 hdc in next st, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (49 sts) Round 8: ch 2, \*work cable (see special stitch instructions) using first 4 sts, 1 hdc in next 2 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (56 sts) Round 9: ch 2, \*fpdc in first 4 sts, 1 hdc in next 3 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (63 sts) Round 10: ch2, \*fpdc in first 4 sts, 1 hdc in next 5 sts. Repeat from \* around, join with sl st to ch2 space. (63 sts) Round 11: Repeat round 10. Round 12: ch2, \*work cable using first 4 sts, 1 hdc in next 5 sts. Repeat from \* around, join with sl st to ch2 space. (63 sts) Round 13-15: Repeat Round 10. Repeat rounds 12-15 until hat measures $5\,\%$ inches.
Edge and Brim Instructions (Size 2):
EDGE INSTRUCTIONS:
Round 1-3: Ch2, bpsc (see special stitch instructions) in each st around. Join with sl st to ch2 space. (63 sts)
BRIM INSTRUCTIONS:
Row 1: Chl, sc 25 sts, turn Row 2: sl st across 25 sts, turn Row 3: sc through rows 1 and 2 (through the sc and sl st) turn Row 4: sl st across, turn Row 5: sc through the previous 2 rows (through the sc and sl st) turn Row 6: sl st across, turn Row 7: sc through the previous 2 rows (through the sc and sl st) turn Row 8: sl st across, turn Row 9: sc through the previous 2 rows, DO NOT TURN
FINAL EDGING ROUND:
Row 10: sc down the left edge of the brim, continue to sc evenly around the entire back edge of the hat, continue to sc up the right side and across the front of the brim end with a slip stitch into the first sc of this round. Fasten off . Try not to crochet the last round too tightly as it will not have enough give around the head. To finish: Cut yarn and fasten off. Weave in the ends with a tapestry needle.
Size 3 Pattern:
Foundation: ch4, join with sl st in first st to make a ring. Round 1: 8 hdc in ring, join to first st with a sl st. (8 sts) Round 2: ch2, \*fpdc and hdc in next 8 sts, join with sl st to ch2 space. (16 Ssts) Round 3: ch 2, \*fpdc in first st, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (24 sts) \*\*\* Make sure you are lining up the fpde with the fpde in the previous row, the second fpdc will be in the hdc of the previous row.\*\*\*\* Round 4: ch2, \*fpdc in first 2 sts, fpdc and hdc in next st. Repeat from \* around, join with a sl st to ch2 space. (32 sts) Round 5: ch2, \*fpdc in first 3 sts, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (40 sts) Round 6: ch 2, \*fpdc in first 4 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (48 sts) Round 7: ch 2, \*fpdc in first 4 sts, 1 hdc in next st, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (56 sts) Round 8: ch 2, \*work cable (see special stitch instructions) using first 4 sts, 1 hdc in next 2 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (64 sts) Round 9: ch 2, \*fpdc in first 4 sts, 1 hdc in next 3 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (72 sts) Round 10: ch2, \*fpdc in first 4 sts, 1 hdc in next 5 sts. Repeat from \* around, join with sl st to ch2 space. (72 sts) Round 11: Repeat round 10. Round 12: ch2, \*work cable using first 4 sts, 1 hdc in next 5 sts. Repeat from \* around, join with sl st to ch2 space. (72 sts) Round 13-15: Repeat Round 10. Repeat rounds 12-15 until hat measures $\mathbf{6}\,^{1}\!/\!_{2}$ inches.
Edge and Brim Instructions (Size 3):
EDGE INSTRUCTIONS: Round 1-3: Ch2, bpsc (see special stitch instructions) in each st around. Join with sl st to ch2 space. (72 sts)
DiMV IuimULiUu.
Row 1: Ch1, sc 28 sts, turn Row 2: sl st across 28 sts, turn Row 3: sc through rows 1 and 2 (through the sc and sl st) turn Row 4: sl st across, turn Row 5: sc through the previous 2 rows (through the sc and sl st) turn Row 6: sl st across, turn Row 7: sc through the previous 2 rows (through the sc and sl st) turn Row 8: sl st across, turn Row 9: sc through the previous 2 rows (through the sc and sl st) turn Row 10: sl st across, turn Row 11: sc through the previous 2 rows, DO NOT TURN
FINAL EDGING ROUND:
Row 12: sc down the left edge of the brim, continue to sc evenly around the entire back edge of the hat, continue to sc up the right side and across the front of the brim end with a slip stitch into the first sc of this round. Fasten off . Try not to crochet the last round too tightly as it will not have enough give around the head.] To finish: Cut yarn and fasten off. Weave in the ends with a tapestry needle.
Size 4 Pattern:
Foundation: ch4, join with sl st in first st to make a ring. Round 1: 8 hdc in ring, join to first st with a sl st. (8 sts) Round 2: ch2, \*fpdc and hdc in next 8 sts, join with sl st to ch2 space. (16 sts) Round 3: ch 2, \*fpdc in first st, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (24 sts) Makenfwivio the second fpdc will be in the hdc of the previous row.\*\*\*\* Round 4: ch2, \*fpdc in first 2 sts, fpdc and hdc in next st. Repeat from \* around, join with a sl st to ch2 space. (32 sts) Round 5: ch2, \*fpdc in first 3 sts, fpdc and hdc in next st. Repeat from \* around, join with sl st to ch2 space. (40 sts) Round 6: ch 2, \*fpdc in first 4 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (48 sts) Round 7: ch 2, \*fpdc in first 4 sts, 1 hdc in next st, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (56 sts) Round 8: ch 2, \*fpdc in first 4 sts, 1 hdc in next 2 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (64 sts) Round 9: ch 2, \*work cable (see special stitch instructions) using first 4 sts, 1 hdc in next 3 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (72 sts) Round 10: ch2, \*fpdc in first 4 sts, 1 hdc in next 4 sts, 2 hdc in next st. Repeat from \* around, join with sl st to ch2 space. (80 sts) Round 11: ch 2, \*fpdc in first 4 sts, 1 hdc in next 6 sts. Repeat from \* alvunu, Jum wiui si st tU cnz spact. (oU sts) Round 12: Repeat round 11. Round 13: ch2, \*work cable using first 4 sts, 1 hdc in next 6 sts. Repeat from \* around, join with sl st to ch2 space. (80 sts) Round 14-16: Repeat Round 11. Repeat rounds 13-16 until hat measures $6\,\%$ inches.
Edge and Brim Instructions (Size 4):
EDGE INSTRUCTIONS: Round 1-4: Ch2, bpsc (see special stitch instructions) in each st around. Join with sl st to ch2 space. (80 sts) BRIM INSTRUCTIONS: Row 1: Ch1, sc 28 sts, turn Row 2: sl st across 28 sts, turn Row 3: sc through rows 1 and 2 (through the sc and sl st) turn Row 4: sl st across, turn Row 5: sc through the previous 2 rows (through the sc and sl st) turn Row 6: sl st across, turn Row 7: sc through the previous 2 rows (through the sc and sl st) turn Row 8: sl st across, turn Row 9: sc through the previous 2 rows (through the sc and sl st) turn Row 10: sl st across, turn Row 11: sc through the previous 2 rows, DO NOT TURN
FINAL EDGING ROUND:
Row 12: sc down the left edge of the brim, continue to sc evenly around the entire back edge of the hat, continue to sc up the right side and across the front of the brim end with a slip stitch into the first sc of this round. Fasten off . Try not to crochet the last round too tightly as it will not have enough give around the head.] To finish: Cut yarn and fasten of. Weave in the ends with a tapestry needle. \*\*\*\*\*The patterns sold from my Shop may not be sold or duplicated under any circumstances. The actual finished product may be sold, but my Shop name and URL web page must be mentioned in listing or wherever item is displayed in the following manner:\*\*\*\*\*\*\*\*\*\*\*\*\* McKinley's Closet http://mckinleyscloset.blogspot.com
