Detailed Crochet Pattern for Princess Bubblegum from Adventure Time with Comprehensive Instructions and Materials List

1. Instruments and materials

. 1.00 mm hook · Purple, pink, light pink, blue and yellow yarn · Sewing needle · A piece of wire · Stuffing material · A piece of pink carded merino wool

Princess Bubblegum — character of the popular cartoon “Adventure Time", that was created by Pendleton Ward for Cartoon Network. This toy was crocheted with “lris" yarn (150m/25g) and"Ariadna KAJA" yarn (200m/30g). Both are 100% cotton. To create a toy with a height of 16.5 cm you must crochet with single yarn using a 1.o0 mm hook. All details except the diadem are crocheted with "lris" yarn. The diadem is crocheted with “Ariadna KAJA" yarn. The hair is made of pink carded merino wool combed sliver with a 18 mic thickness. The stuffing material used in this toy is polyester wadding. This pattern is for personal use only. Sharing information from this pattern is prohibited. If you publish photos of the toys that are crocheted following this pattern, it is better to mention the author of the pattern. You can also use hashtag #AradiyaToys at Twitter and Instagram to share your toy and see other toys that are created following AradiyaToys' patterns.

2. Abbreviations

Ch chain Sc single crochet Dc double crochet Tr treble crochet HDc half double crochet SI slip stitch INC increase INVDEC invisible decrease BLO back loops only FLO front loops only INCHDc 2Dc crocheted in one stitch INCDc 2HDc crocheted in one stitch Tip 2 To keep track of the beginning of the row, use a marker. Pin marker to the last loop of the row. Every new row must be finished with a loop at the marker.

Tip 1

The toy must be crocheted with tight stitches, to be sure that there won't be any holes throughwhich stuffing material can be seen. All amigurumi toys are crocheted with tight stitches. Avoid small holes when stretching crochet fabric, if there are some tiny holes, use a smaller size hook. To avoid seams, all details are crocheted in a spiral without slip stitch and lifting loops. There is a chance that you will lose the beginning of the row; to avoid this, use a marker. It can be a colored pin or thread of contrasting color.

3. Head

With light pink yarn

1 row 6Sc in magic circle (6) 2 row 6INC (12) 3 row (1Sc, INC) repeat 6 times (18) 4 row (2Sc, INC) repeat 6 times (24) 5 row (3Sc, INC) repeat 6 times (30) 6 row (4Sc, INC) repeat 6 times (36) 7 row (5Sc, INC) repeat 6 times (42) 8 row (6Sc, INC) repeat 6 times (48) 9 - 18 rows Sc in each Sc around (48) 19 row (6Sc, INVDEC) repeat 6 times (42) 20 row (5Sc, INVDEC) repeat 6 times (36) 21 row (4Sc, INVDEC) repeat 6 times (30) 22 row (3Sc, INVDEC) repeat 6 times (24) 23 row (2Sc, INVDEC) repeat 6 times (18) 24 row (1Sc, INVDEC) repeat 6 times (12) 25 row 6INVDEC (6), SI Cut the yarn. Tighten all stitches and hide the end of yarn inside the head. Tip 3 To avoid uneven edges, all details that are made in spiral technique must be finished with a slip stitch.

Image 1

Image 2

Image 3

4. Legs

With pink yarn

1 row 5Sc in magic circle (5) 2 row 4INC, 1Sc (9) 3 - 5 rows Sc in each Sc around (9) 6 row 9Sc, Ch turn (9) 7 row 3Sc, Ch turn (3) 8 row 3Sc, 2Sc (into transverse loops), Sl (into base of 9Sc), Ch turn (5) 9 row (skip SI) 1Sc, 2INVDEC, 2Sc, SI (into base of 9Sc), Ch turn (5) 10 row (skip Sl and crochet the whole circumference) 9Sc (9)

Tip 4

Crochet the second stitch (skip the first stitch) from the hook after the turn,ifit is not mentioned to do it in another way.

Image 4

Image 5

Image 6

Image 7

4.2 Legs

Connect light pink yarn and cut pink one. 11 - 39 rows Sc in each Sc around (9) Starting from the 40th row, the patterns for crocheting the left and the right legs are different. Right leg 40row 9Sc, 1Sc (extra stitch made to help conceal the unshapely edges) (9) Cut the yarn. Left leg 40 row 9Sc, Ch turn (9) 41 - 47 rows 3Sc, Ch turn (3) Do not cut the yarn.

Image 8

Image 9

Image 10

Image 11

4.3 Legs

The legs are connected together with the end of the yarn that we left before on the left leg. Skip 2 stitches from the last stitch on the right leg and start connection on the 3rd stitch. Insert the hook into the back loop of the stitch on the right leg and then insert into the front loop of the stitch on the left leg and crochet Sc. (lmage 13) Crochet 2 more Sc in the same way. Continue crocheting in spiral 48 row 10Sc (into transverse loops), 6Sc (on the left leg), 10Sc (into transverse loops), 6Sc (on the right leg) (32) 49 row INC, 6Sc, INC, 24Sc (34) 50 - 51 rows Sc in each Sc around (34) Take some soft wire, make the carcass for the legs. (lmage 15) Insert the carcass into the crocheted leg. (lmage 16) Bend the foot, to make the leg more stable. Repeat with the second leg. (lmage 17)

Image 12

Image 13

Image 14

Image 15

Image 16

Image 17

5. Body

Cut the extra wire. 52 row INVDEC, 6Sc, INVDEC, 7Sc, INVDEC, 6Sc, INVDEC, 7Sc (30) 53 - 55 rows Sc in each Sc around (30) 56 row INVDEC, 5Sc, INVDEC, 6Sc, INVDEC, 5Sc, INVDEC, 6Sc (26) Connect purple yarn and cut light pink one. 57 row Sc in each Sc around (26) 58 row BLOSc in each Sc around (26) 59 row Sc in each Sc around (26) Connect pink yarn and cut purple one. 60 - 61 rows Sc in each Sc around (26) 62 row 14Sc, INC, 5Sc, INC, 5Sc (28) Stuff detail with stuffing material, continue crocheting.

Image 18

Image 19

Image 20

Image 21

Image 22

5.1 Body

63 row 15Sc, INC, 5Sc, INC, 6Sc (30) 64 row 16Sc, INC, 6Sc, INC, 6Sc (32) 65 row 16Sc, 2INC, 6Sc, 2INC, 6Sc (36) 66 — 67 rows Sc in each Sc around (36) 68 row 17Sc, 2INVDEC, 6Sc, 2INVDEC, 5Sc (32) 69 row 17Sc, INVDEC, 6Sc, INVDEC, 5Sc (30) 70 row INVDEC, 7Sc, INVDEC, 1Sc, INVDEC, 1Sc, INVDEC, 7Sc, INVDEC, 1Sc, INVDEC, 1Sc (24) Stuff detail with stuffing material, continue crocheting. 71 row INVDEC, 6Sc, INVDEC, 1Sc, INVDEC, 1Sc, INVDEC, 2Sc, INVDEC, 1Sc, INVDEC, 1Sc (18) 72 row 8Sc, INVDEC, 6Sc, INVDEC (16) 73 row 6Sc, 2INVDEC, 3Sc, 2INVDEC (one stitch from the next row) (12) 74 row 3Sc (extra stitches made to help conceal the unshapely edges) (3) Connect light pink yarn and cut pink one. 75 row BLOSc in each Sc around (12) 76 row Sc in each Sc around (12) 77 row Sc in each Sc around (12), Sl Cut the yarn, leave a long end for sewing.

Image 23

Image 24

Image 25

Image 26

6. Dress

Connect pink yarn to the last Sc of the 58th row of the body, where you crocheted back loops only. 1 row 25Sc, INC (27) 2 row 3Sc, INC, 9Sc, INC, 3Sc, INC, 8Sc, INC (31) 3 row 4Sc, INC, 10Sc, INC, 4Sc, INC, 9Sc, INC (35) 4 row 2Sc, INC, 5Sc, INC, 4Sc, INC, 5Sc, INC, 5Sc, INC, 5Sc, INC, 3Sc (41) 5 row 7Sc, INC, 2Sc, INC, 4Sc, INC, 2Sc, INC, 10Sc, INC, 7Sc, INC, 3Sc (47) 6 - 7 rows Sc in each Sc around (47) 8 row 8Sc, INC, 12Sc, INC, 11Sc, INC, 9Sc, INC, 3Sc (51) 9 - 17 rows Sc in each Sc around (51) 18 row 3Sc, INC, 25Sc, INC, 21Sc (53) 19 - 40 rows Sc in each Sc around (53) 41 row Sc in each Sc around (53), Sl Fasten and cut the yarn, hiding the end on the back side of the detail.

Image 27

Image 28

Image 29

Image 30

Image 31

Image 32

AradiyaToys.com

7. Arms

With light pink yarn

1 row 6Sc in magic circle (6) 2 row (1Sc, INC) repeat 3 times (9) 3 - 4 rows Sc in each Sc around (9) 5 row 3Sc, INVDEC, 2Sc, INVDEC (7) 6 — 24 rows Sc in each Sc around (7) Connect pink yarn and cut light pink one. 25 row Sc in each Sc around (7) 26 row BLO7INC (14) 27 row (1Sc, INC) repeat 7 times (21) 28 -31 rows Sc in each Sc around (21) Take some soft wire and insert it into the thin part of the arm.

Image 33

Image 34

Image 35

Image 36

Image 37

Image 38

7.1 Arms

32 row (1Sc, INVDEC) repeat 7 times (14) Stuff detail with stuffing material, continue crocheting. 33row INVDEC (5 stitches should be left uncrocheted) (2), Sl Cut the yarn, leave a long end for sewing. Connect pink yarn to the last Sc of the 26th row, where you crocheted back loops only and crochet DW Sc, INCDc, Sc, INCDc, Sc, INCDc, Sc and in the same stitch Dc, Sc in the first stitch, that already has the very first Sc (12), SI Fasten and cut the yarn, hiding the end on the back side of the detail Flatten the sleeve on one side as shown on the photo. (lmage 43) Make 2 details.

Image 39

Image 40

Image 41

Image 42

Image 43

8. Collar

With purple yarn

Choose the central loop of the last row of dress and connect purple yarn. (Image 44) Crochet round 1 row 1Dc, INCDc, INCHDc, 7INC, INCHDc, INCDc, 1Dc in the first stitch, that already has the very first Dc (24), Sl Fasten and cut the yarn, hiding the end on the back side of the detail.

Image 44

Image 45

Image 46

Image 47

Image 48

9. Diadem

With yellow yarn

Top part 1 row 4Sc in magic circle (4) 2 row 4INC (8) 3 row Sc in each Sc around (8) 4 row (2Sc, INVDEC) repeat 2 times (6) 5 row (1Sc, INVDEC) repeat 2 times (4) 6 — 10 rows Sc in each Sc around (4) 11 row 4Sc, INC (6) 12 row Sc in each Sc around (6) 13 row 5Sc, INC (7) 14 row Sc in each Sc around (7) 15 row 6Sc, INC (8) 16 row 7Sc, INC (9) 17 row 4Sc, INC, 3Sc, INC (11), SI Cut the yarn, leave a long end for sewing. Bottom part 1 row 4Sc in magic circle (4) Keep crocheting rows in spiral (Sc in each Sc around) until the bottom part is 12 cm long, Sl Cut the yarn, leave a long end for sewing. Side part Ch10 Cut the yarn, leave a long end for sewing.

10. Topaz

Image 49

Image 50

Image 51

With blue yarn

1 row 5Sc in magic circle (5), Sl Cut the yarn, leave a long end for sewing.

Image 52

10. Diadem's assembly

Place the topaz on the top part of diadem as shown on the photo. (lmage 53) Sew it with the end of blue yarn that we left before. Place the side part of diadem around the topaz and sew it with the end of yellow yarn that we left before. (lmages 54 and 55) Place the top part of diadem on the center of its bottom part and sew it with the end of yellow yarn that we left before. (lmages 56 and 57) Connect the ends of the bottom part of the diadem and sew them together with the end of yellow yarn that we left before. (lmage 58) Fasten and cut the yarn, hiding the ends inside the diadem.

Image 53

Image 54

Image 55

Image 56

Image 57

Image 58

Image 59

11. Hair

In order to locate the areas where the hair must be attached, you will have to use pins. First, mark the center of the face pin marked in red (lmage 60). Then, mark the places where hair should not be: the face and the forehead (on lmage 61, the red pins mark the face area, while the grey pins mark the forehead area, which will be covered by the fringe. Please note that the grey pins are placed in a slightly curved line, like a natural hairline, as can be seen on Image 62). Finally, mark the area where the long hair will be attached (circle of red pins shown at various angles on Images 62 to 65). The little area between the hair area and the natural hairline is where you will attach the fringe hair (area marked in red on Image 66).

Image 60

11.1 Hair

Princess Bubblegum has long hair. The piece of wool should be twice as long as her hair. (lmage 67) Take a piece of wool and split it into thin strands. (Image 68) Insert the hook into one of the stitches marked with a pin, where the hair should be situated. (on Image 69, the hook is inserted in the hair area just behind the fringe area). Take a strand. (lmage 70) Guide the strand through the stitch. (lmage 71) Guide the ends of the strand into the loop and tighten. (lmage 72) The first strand of hair is ready. (lmage 73)

Image 67

Image 68

Image 69

Image 70

Image 71

Image 72

Image 73

11.2 Hair

Insert the hook into the next stitch and do the same with a second strand. Continue until all the hair area is filled. (lmages 74, 75 and 76) Connect short strands in the same way to the fringe area (between hair area and forehead, as was shown on Image 66). This will be the fringe. (lmage 77) Pull the strands downward row by row, starting from the bottom of the head, and comb the hair. In this way you will comb out all unnecessary hair and give it the needed shape. (lmage 78) Cut the fringe and hair a little. (lmage 79) The final haircut will be done after the head is sewn.

Image 74

Image 75

Image 76

Image 77

Image 78

Image 79

12. Assembly

Place the arms on the sides of the body and fasten them with pins. Sew the arms with the ends of pink yarn that we left before. Put the head onto the neck so that the neck is situated directly under the bottom center of the head and fasten it with pins. Sew the head with the end of light pink yarn that we left before. Fasten and cut the yarn, hiding the ends inside the details.

Image 80

Image 81

Image 82

Image 83

12.1 Assembly

Comb the hair and cut it until the needed length is reached. Try to avoid parting of the hair. Split some strands of the hair and put them in front of the arms.

Image 84

Image 85

Image 86

Image 87

Image 88

12.2 Assembly

Try the diadem on. Bend the arms, as shown on the photo. (lmage 90) Embroider the eyes and the mouth with black yarn. Embroider the fingers with black yarn on both hands. Fasten and cut the yarn, hiding the ends inside the details.

Image 89

Image 90

Image 91

Image 92

12.3 Assembly

Congratulations, your Princess Bubblegum is ready!

Don't forget to share your final result on Twitter and Instagram using #AradiyaToys hashtag. If you enjoyed this pattern, subscribe for more! All links below are clickable (touchable).