Convertible Fingerless Mitts with Anatomical Hood and Lightning Bolt Decoration Knitting Pattern by Anna Johanna

Vasama

Convertible fingerless mitts Design by Anna Johanna

Pattern illustration

A combination of fingerless mitts and mittens for keeping warm and still being able to use your phone. 7he mitts feature an anatomically shaped hood and a lightning bolt decoration on the back which hides the transition to the hood. Yarn:The Uncommon Thread Everyday Sport, 1 skein Weedles:3.0 mm circular needles Gauge:8 sts x12 rows = 3 x 3 cm Size:M Other stuff:removable stitch markers and other needles to leave stitches on waiting Abbreviations

COcaston
pmplace marker
smslip marker
mlrmake one right (Pick up the yarn between the stitches from back to front and knit it.)
m1lmake one left (Pick up the yarn between the stitches from front to back and ktbl.)
k2togk 2 sts together. (l st decreased.)
sskslip, slip, knit. Slip 1 without knitting, slip 1 without knitting, move both sts back to the left needle and k together through the back loop. (l st decreased.)

Cuff:

C48sts, divide th sts n2needes formagicloppaceamarker and joininround Knit 24 rounds in (k 1. p1) rib.

Thumb gusset and lightning bolt:

Work the thumb gusset increases on the 1t needle and at the same time start the lightning bolt chart on the 2nd needle. From this point forward there are separate instructions for right and left hand. You can use the charts either way you like: to make identical mittens or mirrored ones. Just make sure to focus the slipped sts of the charts above ktbl sts of the cuff. The hood instructions apply to both hands.

Right hand:

For 9 rounds, k on needle 1 and follow chart on needle 2. Then, start the thumb gusset increases. ft round:sm, k2, mlr, kl, mll, k to end of needle I and follow chart on needle 2. 2d round:'sm, to endof nele and fllow chart n nedle 2. 3d round:sm, k, mr, k, mll kto end of neede I and follw chart on nede . 4h round: As 2nd round. " round' sm, k, mr, k, mll to endof ede and fllow chart n needl . Gth round: As 2dround. Continue with the increase this way on every other round until you have 17 thumb sts and have knitted round 24 of the chart. Continue without increases for 5 rounds. Next round: sm, k2, slip the 17 thumb sts on a holder, C0 2 sts and k to end of needle 1 and follow chart on needle 2. Continue (k needle 1, follow chart on needle 2) until you have knitted round 36 of the chart. You might want to place a marker on this row to help finding the right row from which to pick up and knit the hood sts later on. ettgngsnsttt

Fingers:

Pinky round 1: sm, k 19 and place them on a holder, k the remaining 6 sts on needle 1 and the first 6 sts on needle 2 (place the remaining sts on needle 2 on a holder). C0 3 and join in the round to make the pinky finger. Pinky rounds 2-8:k all sts. Pinky rounds 9-10:(ktbl 1. pl) ×7. ktbl1 I worked the hands from the fingertips. Place the remaining sts from the holder back onto the needles and begin working on needle 2.

Pattern illustration

Next round:k allsts on needle 2 and needle1. pick upand knit sts from theC edge of the pinky finger.jin in the round. Knit in st st for 3 rounds. Ring finger round /:k 6 (place the remaining sts on needle 2 on a holder), C0 3. place the first 13 sts on needle I on a holder, k the remaining 9 sts and continue in the round. Ring finger rounds 2-8:k all sts. Ring finger rounds 9-10- (ktbl1, l) x 9. Bind off losely. Middle finger round 1: Place the first 6 sts from the holder on needle 2 side back onto needle 2 and k them, C03, place the last 6 sts from the holder on needle 1 side back onto needle 1, k them, pick up and knit 3 sts from the CO edge of the ring finger, join in the round. Middle finger rounds 2-8:k all sts. Middle finger rounds 9-10:(ktbl 1 pl) x 9. Bind off loosely. Index finger round I: Place the remaining 6 sts from the holder on needle 2 side back onto needle 2 and k them, place the remaining 7 sts from the holder on needle 1 side back onto needle 1, k them, pick up and knit 4 sts from the CO edge of the middle finger, join in the round. Index finger rounds 2-8:k all sts. Knit2stro Bind off loosely. Thumb round I Place the 17 thumb sts from the holder back onto the needles, k them, pick up and knit 3 sts from the CO edge above the thumb, join in the round. Thumbrounds2-10:k all sts. Thumb round 11-12:(ktbl 1, p1) x 10. Bind off loosely.

Left hand:

For 9 rounds, k on needle 1 and follow chart on needle 2. Then, start the thumb gusset increases. ft round: sm, k21, mlr, kl, m1l, k 2, follow chart on needle 2. 2"d round:sm, k to end of needle I and follow chart on needle 2. 3d round' 'sm, kl, mlr, k, mll, 2, fllw chart on needle 2. 4h round: As 2dround. 5\* round: sm, kl, mlr, k, mll k, fllow chart on needle 2. Gth round:As 2d round. Continue with the increases this way on every other round until you have 17 thumb sts and have knitted round 24 of the chart. Continue without increases for 5 rounds. Wext round:sm, k2l, slip the 17 thumb sts on a holder, CO 2 sts and k2, follow chart on needle 2. Continue (k needle 1, fllow chart on needle 2) until you have knitted round 36 of the chart. You might want to place a marker on this row to help finding the right row from which to pick up and knit the hood sts later on. Once you have left the 4 lightning bolt sts on holders, continue in st st for 6 rounds or until you reach your pinky finger.

Fingers:

Pinky round I:sm, k6, place the remaining 19 sts of needle1 on a holder, CO3, place the first 18 sts on needle 2 on a holder, k6 and join in the round to make the pinky finger. Pinky rounds 2-8:k all sts. Pinky rounds 9-10-(ktbl 1 pl) x 7, ktbl1. Bind offlosely. Place the remaining sts from the holder back onto the needles and begin working on needle 1. Next round·k all sts on needle 1 and neede 2. pick up and knit 3sts from the C edge of the pinky finger.jin in the round. Knit in st st for 3 rounds. Ring finger round I:k 6 (place the remaining sts on needle 1 on a holder), C0 3, place the first 12 sts on needle 2 on a holder, k the remaining 9 sts and continue in the round. Ring finger rounds 2-8:k all sts. Ring finger rounds 9-10D:(ktbl1 pl) x 9. Bind offloosely. Middle finger round 1: Place the first 6 sts from the holder on needle 1 side back onto needle 1 and k them, C03, place the last 6 sts from the holder on needle 2 side back onto needle 2, k them, pick up and knit 3 sts from the CO edge of the ring finger, join in the round. Middle fingerrounds 2-8:k all sts. Middle finger rounds 9-10:(ktbl1, pl) x 9. Bind off losely. Index finger round I: Place the remaining 7 sts from the holder on needle 1 side back onto needle 1 and k them, place the remaining 6 sts from the holder on needle 2 side back onto needle 2. k them, pick up and knit 4 sts from the CO edge of the middle finger, join in the round. Index finger rounds 2-8:k allsts. Index finger rounds 9-10. (ktbl 1, pl) x 8, ktbl 1. Bind offloosely. Thumb round I: Place the 17 thumb sts from the holder back onto the needles, k them, pick up and knit 3 sts Round 6: 16dc (16dc) Thumb rounds2-i0:k all sts. Thumb round 11-12:(ktbl 1, p1) x 10. Bind off loosely.

Hood:

Setup round:Holding the mitt in front of you facing the back side and with the fingers pointing up, pick up and knit 8 sts from the right side of the slipped sts, (place the next slipped st from holder to the needle, pick up and knit next st from the mitten) x 4, pick up and knit 8 more sts from the left side of the slipped sts, C0 loosely 24 sts, pm, join in the round. (48 sts) Next 5 rounds:follw chart on needle 1 (the back). (ktbl1, pl) x 12 on needle 2 (the cast on sts). Continue (follow chart on needle 1, k on needle 2). When you get to the decreases, do them on both needles. Once you have knitted the chart, cut the yarn leaving a 30 cm tail, graft the back and front sts together using Kitchener Stitch.

Thumb hood:

Setup round· Pick up and knit 7 sts from the back side of the thumb (4 rounds below the rib), C0 loosely 13 sts, pm, join in the round. (20 sts). Next 3 rounds:k7. (ktbl 1. pl) x 6, ktbl Continue in st st for 16 rounds or until the thumb hood measures 1 cm less than the desired length. Decrease round·kZtog to end of round. Repeat the decrease round one more time, cut the yarn leaving a tail, pull the tail through the remaining 5 sts and weave in the ends.

Pattern illustration

Right Hand Chart

Pattern illustration

Right Hood Chart

Pattern illustration

Legend

\~ knit \~ slip one purlwise cl1 \~ slip one stitch to cable needle and hold to front of work, knit one, knit one from cable needle cr1 \~ slip one stitch to cable needle and hold to back of work, knit one, knit one from cable needle b \~ knit the st from the cable needle and place on a holder \~ slipone stitchtocalenedle anholdtofront ofwork ns \~ no stitch. ssk \~ slip, slip knit kztog \~ knit two together Please note that the legend for row 36 of the hand chart is slightly different for the left hand.

![](images/ee89264c7ac196ae8d3c46e997120976e3e274252707d5ac60ccb704e16f5820.jpg)

Legend

k \~ knit \~ slip one purlwise cl1 \~ slip one stitch to cable needle and hold to front of work, knit one, knit one from cable needle er \~ sip one stitchto cable needl and hold to back of work, knit one, knit one from cable needle b \~ kfbst from the cable needle e \~ slip one sto cable needle and hold to back of work, k next s and place on a holder ns \~ no stitch ssk \~ slip,slip knit ketog \~ knit two together

Similar Design Patterns