Passap 75s Sock Pattern by Ozlorna Designs: A Detailed Knitting Machine Guide for Customizable Socks

Passap 75s SockS by Ozlorna Designs

I based mine on Passap Pattern 75 from the first little purple book and is achieved by alternating CX and DX with 1 pusher in RP at regular intervals depending on stitch count. 4R CX/CX, Black; 4R DX/DX, Grey, ev 5th pusher in RP. eg on my 60 st - every 5th stitch is tucked, on the 64st, every 4th.

Pattern illustration

Pattern illustration

You will need a Passap knitting machine. 2 x 50g sock wool in different colours. Starting from the top down: Needle Set up: Front bed needles start on left on 30. needle seq: 1.11.11. to end .1 ending on needle 30 on right. on the back, 11.11.11 to last three 111; I don't count how many stitches in total for 2:2 industrial rib, I need 60 sts to work with on the leg section. Handle down, rack one needle to left. Cuff: Colour 1: Blue strippers, N/N, T2, 1R, CX/CX T3.5, 2R, rack one needle to right N/N, T3.5, 1R. reset RC 000 N/N, T3.5, 20R. Transfer sts to the back bed, I put the

Tuck stitch DK/DK after the first 2 rows

Pattern illustration

two front bed stitches together and transferred them into the single vacant needle.

Pattern illustration

Front bed needle set up Back bed needle set up Leg: Black strippers, handle up, GX/N, T4.5 (for the rest of sock), 2R, transfer 15 sts each side to front bed. pusher set up: starting on front bed, left side, 4WP (up), 1RP (down) right around both beds, in continuous sequence, ending with very last one on left hand side of back bed DOWN. continue this 8R sequence to row 143 (col 1), lock on left.I based mine on Passap Pattern 75 from the first little purple book and is achieved by alternating CX and DX with 1 pusher in RP at regular intervals depending on stitch count. 4R CX/CX, Black; 4R DX/DX, Grey, ev 5th pusher in RP Heel, Col 1: BX/GX, work short rows to 10 sts (put some weight on heel) and back (lock on left). work one row on the back bed (keeping to pattern).

Foot:

Pusher set up: back bed remain unchanged; Front bed, last needle (on right) is DOWN, the rest are up and will be making stripes on the sole of the sock, Col 2: DX/ DX, 4R Col 1: CX/CX, 4R Continue this 8R sequence to row 142 (black) Toe: Col 1:, CX/CX Pick up 3rd st from each end, put it on top on 2nd and at the same time, pick up 1st and 2nd together and put where 3rd and 2nd were, on all ends. 4 sts in total, each decrease. on rows 142, 150, 156, 162, 166, 170, 174, 178 then ev 2 RC (single row) until 4 sts are left. Here it is stretched out in the single colour. Suggested pusher set up for these size socks or whichever combination you like, BUT the LAST PUSHER ON EACH BED MUST BE DOWN. 48 sts - every 4th 52 sts - every 5th x 2 and 6st x 1 in the centre 56 sts - every 7th 60 sts - every 5th 64 sts - every 4th 68 sts - every 4th x 8 and 5th x 2 72 sts - every 4th or 6th 78 sts - every 4th x 9 and 3rd x 1; or 4th x 8 and 7st x 1 in the

Pattern illustration

Similar Design Patterns