Thor's Photo Prop Set
AUSTRALIAN TERMINOLOGY Tension: please see each individual component of pattern Material Needed: 8 Ply yarn (I used 4 Seasons Marvel in Grey, white, maroon and Brown) 3MM hook, J/10-6MM hook, G/6-4.25MM Hook Darning Needle Hobby Fill for stuffing 4x buttons, 2x grey for nappy cover, 2x yellow/gold for cape Stitches Used: Please see individual components for stitches used. Size: 0-3 months \*\*\*Please note the last 2 pages are simply the pattn in shorthand instead of the full written pattern\*\*\*\*\*
Thor's Hammer
AUSTRALIANTERMINOLOGY Tension: N/A Material Needed: 8 Ply yarn (I used 4 Seasons Marvel in Grey and Brown) 3MMhook Darning Needle Hobby Fill for stuffing Stitches Used: CH - Chain DC - Double Crochet ss - Slip Stitch Size: 19cm long \*\*\*\*leae ntthelastpag ismlythe patinshorthand insteadofthefll written pattern\*\*\*\*\* Head - Part A: - Make 4 - Grey - CH 20 1. DC in the 2nd ch from hook and each ch across, ch 1, turn (19) 2-8. DC in each st across, CH 1, turn (19) 9. DC in each st across Fasten off - Join each rectangle together along the long side with a row of DC Head - Part B: - Make 2 - Grey - CH 12 1． DC in the 2nd ch from hook and each ch across, ch 1, turn (11) 2-9. DC in each st across, CH 1, turn (11) 10. DC in each st across Fasten off- Join each Square to the end of the tube made with the rectangles with a row of DC along each edge. STUFF before fully closing
Handle: - Brown -
1. CH 15, ss to form ring. in the ch you just ss into Place 6DC, working behind the 15 ch, ss into the top of the 1st dc made (see figures below)(6) 1. Do 2x DC in each stitch around, ss to first stitch of round (12) 2. (2DC in first stitch, DC in next stitch) repeat around ss to first stitch of round (18) 4-26. DC in each st around, ss to beginning DC of round (18) Fasten off - Stuff, center on one of the rectangle sides of the head of the hammer and Stitchon.
AUSTRALIAN TERMINOLOGY Tension: 10cm x 10cm = 13xHTR x 9 rows Material Needed: 8 Ply yarn (I used 4 Seasons Marvel in Grey) J/10-6MM hook Darning Needle 2Buttons Stitches Used: HTR - Half Treble Crochet CH - Chain HTRdec - Half Treble Crochet Decrease DC - Double Crochet ss - Slip Stitch \*\*\*\*lease note thelast page is smly the patt in shorthandinstead f thefll Written pattern\*\*\*\*\* Nappy Cover: - Grey - CH 52 1. HTR in 3rd ch from hook and each ch across, ch 2, turn (49) 2. HTR, ch 1, miss 1, HTR in the next 45 sts, ch 1, miss 1, HTR in the last st, ch 2, turn (47HTR, 2 CH) 3. HTR in each stitch and chain across ch 1, turn (49) 4. ss in each of the first 14 sts, ch 2, HTR in each of the next 23 sts, leave remaining stitches unworked, ch 2, turn (23 HTR) 5. HTR in each st across, ch 2, turn (23) 6. HTR in the first 21 sts, HTRdec in the last 2 sts, ch 2, turn (22) 7. HTR in the first 20 sts, HTRdec in the last 2 sts, ch 2, turn (21) 8. HTR in the first 19 sts, HTRdec in the last 2 sts, ch 2, turn (20) 9. HTR in the first 18 sts, HTRdec in the last 2 sts, ch 2, turn (19) 10-22. HTR in each st across, ch 2, turn (19) 23. HTR in each st across, ch 1, DO NOT TURN (19) 24. DC even around entire edge of cover. Fasten off - Fold the bottom edge up to the top and fold side flaps in. stitch buttons in line with button holes.
Thor's Helmet
AUSTRALIAN TERMINOLOGY Tension: 10cm x 10cm = 15xTR x 8 rows Material Needed: 8 Ply yarn (I used 4 Seasons Marvel in Grey and White) G/6-4.25MM h0ok Darning Needle Stitches Used: TR - Treble Crochet BLO - Back loop Only Bobble - YO, insert hook into next stitch, pull through, YO, Pull through 2 loops -YO, insert hook (in same stitch), YO, pull up a loop, YO, pull through two loops (3 loops on hook) -YO, insert hook (in same stitch), YO, pull up a loop, YO, pull through two loops (4 loops on hook) -YO, insert hook (in same stitch), YO, pull up a loop, YO, pull through two loops -YO pull through all 5 loops HTR - Half Treble Crochet HTRdec - Half Treble Crochet Decrease DC - Double Crochet SS - Slip Stitch CH - Chain
Size: 0-3 Months
\*\*\*leae nte thelast page isml the patinshorthand insteadofthefll written pattern\*\*\*\*\*
Helmet: - Grey -
3. Place 12TR in a Magic Circle, pull magic circle tight and continue as normal. (12) 4. Do 2x TR in each stitch around, ss to first stitch of round (24) 5. (2TR in first stitch, TR in next stitch) repeat around ss to first stitch of round (36) 6. (2TR in first stitch, TR in next 2 stitches) repeat around ss to first stitch of round (48) 5-8. TR in each ST around ss to first stitch of round (48) 9. BLO - TR in each ST around ss to first stitch of round (48) 10. (TR in the first 7 sts, BOBBLE in the next st) repeat around ss to first stitch of round (42 TR, 6 bobble sts) 11. TR in each ST around ss to first stitch of round (48) 12. BLO - TR in each ST around ss to first stitch of round (48) Fastenoff
Helmet Peak: - Grey -
1. Place 8TR in a Magic Circle, pull magic circle tight and continue as normal. (8) 2. Do 2x TR in each stitch around, ss to first stitch of round (16) 3. (2TR in first stitch, TR in next 3 stitches) repeat around ss to first stitch of round (20) 4. (2TR in first stitch, TR in next 3 stitches) repeat around ss to first stitch of round (25) 5. (2TR in first stitch, TR in next 2 stitches) repeat around ss to first stitch of round (34) Fasten off - Attach to helmet on round 3 of helmet. stitch on catching the BLO of round 5 of thepeak
Wings: - White - Make 2 - CH 50
1. HTR in the 3rd ch from the hook and each of the next 22 ch. HTRdec over the next 2 ch, HTR in the last 23 ch, ch 2, turn 2. HTR in the next 21 ch. (HTRdec over the next 2 ch) do 2 times, HTR in the last 22 ch, ch 1, turn 3. ss in each of the first 6 ch, ch 2, HTR in the next 15 ch. (HTRdec over the next 2 ch) do 2 times, HTR in the last 14 ch, ch 2, turn 4. HTR in the next 13 ch. (HTRdec over the next 2 ch) do 2 times, HTR in the last 14 ch, ch 1, turn 5. ss in each of the first 6 ch, ch 2, HTR in the next 7 ch. (HTRdec over the next 2 ch) do 2 times, HTR in the last 6 ch, ch 2, turn 6. HTR in the next 6 ch. HTRdec over the next 2 ch, HTR in the last 7 ch, ch 1, turn 7. ss in each of the first 3 ch, ch 2, HTR in the next 3 ch. HTRdec over the next 2 ch. HTR in the last 3 ch, ch 2, turn 8. 2HTR in the 1st st, DC in the next st, SS in the next 2 sts, DC in the next st, HTR in each of the last 2 sts Fasten off - Attach to helmet on so the point of the wing is level with round 10 of the helmet - evenly spaced on each side of the helmet
Thor Cape
AUSTRALIAN TERMINOLOGY Tension: 10cm x 10cm = 15xTR x 7 rows Material Needed: 8 Ply yarn (I used 4 Seasons Marvel in Grey and Maroon) G/6-4.25MM Hook Darning Needle 2Buttons Stitches Used: HTR - Half Treble Crochet CH - Chain TRdec - Treble Crochet Decrease DC - Double Crochet ss - Slip Stitch TR - Treble Crochet
Size: 0-3 Months
\*\*\*\*leasnotte last pageis sily the pattminshrthanstead of thefll written pattern\*\*\*\*\* Neck: - Grey - CH 17 1. DC in 2nd ch from hook and each ch across, ch 2, turn 2. (2HTR in first stitch, HTR in next stitch) repeat across, ch 2, turn 3. (2HTR in first stitch, HTR in next 2 stitches) repeat across, ch 2, turn 4. (2HTR in first stitch, HTR in next 3 stitches) repeat across Fasten off - Attach the buttons to each end of the arc
Back: - Maroon - CH 165 1. TR in 3nd ch from hook and each ch across, ch 2, turn 2-23. TRdec over the first 2 sts, TR in each st across, TRdec over the last 2 sts, ch 2, turn 24. TR in the first 7 sts, ch 2, turn (leave remaining sts unworked) 25. TRdec over the first 2 sts, TR in the last 5 sts Fasten off - turn piece so peak just made is on the right hand side. Miss 6 sts, attach ,maroon to the 7th st along. 24. TR in the next 7 sts, ch 2, turn 25. TR in the first 5 sts TRdec over the last 2 sts 26. DC evenly around entire outer edge of piece. Fasten off - Buttons will slip through the TR stitches on the peaks of the top of the cape. no need for buttonholes. CAPE Neck: - Grey - CH 17, do 1st dc in 2nd ch from hook 1. DC across, ch 2, turn 2. (2HTR, HTR) repeat across, ch 2, turn 3. (2HTR, HTRx2) repeat across, ch 2, turn 4. (2HTR, HTRx3) repeat across Fasten off - Attach the buttons to each end of the arc Back: - Maroon - CH 165 do 1st TR in 3rd ch from hook 1. TR across, ch 2, turn 2-23. TRdec, TR across, TRdec, ch 2, turn 24. TRx7, ch 2, turn (leave remaining sts unworked) 25. TRdec, TRx5 Fasten off - turn piece so peak just made is on the right hand side. Miss 6 sts, attach ,maroon to the 7th st along. 24. TRx7, ch 2, turn 25. TRx5, TRdec, CH 1 26. DC evenly around entire outer edge of piece. Fasten off - Buttons will slip through the TR stitches on the peaks of the top of the cape. no need for buttonholes. HELMET Helmet: - Grey - 1．12TR (12) 2. (2TR) rp around (24) 3. (2TR, TR) repeat around (36) 4. (2TR, TR x2) repeat around (48) 5-8. TR around (48) 9. BLO - TR around (48) 10. (TRx7 sts, BOBBLE) repeat around (42 TR, 6 bobble sts) 11. TR around (48) 12. BLO - TR around (48) Fasten off Helmet Peak: - Grey - 1. 8TR (8) 2. (2TR) repeat around (16) 3. (2TR, TRx3) repeat around (20) 4. (2TR, TRx3) repeat around (25) 5.(2TR, TRx2) repeat around (34) Fasten off - Attach to helmet on round 3 of helmet. stitch on catching the BLO of round 5 of the peak
Wings: - White - Make 2 - CH 50 - 1st HTR in 3rd ch from hook 1. HTRx23. HTRdec, HTRx23, ch 2, turn 2. HTRx21 ch. (HTRdec)x2, HTRx22, ch 1, turn 3. SSx6, ch 2, HTRx15, (HTRdec)x2, HTRx14, ch 2, turn 4。 HTRx13, (HTRdec)x2, HTRx14, ch 1, turn 5. SSx6, ch 2, HTRx7, (HTRdec)x2, HTRx6, ch 2, turn 6. HTRx6. HTRdec, HTRx7, ch 1, turn 7. SSx3, ch 2, HTRx3. HTRdec, HTRx3, ch 2, turn 8. 2HTR, DC, SSx2, DC, HTRx2 Fasten off - Attach to helmet on so the point of the wing is level with round 10 of the helmet - evenly spaced on each side of the helmet
NAPPY COVER
Nappy Cover: - Grey - CH 52 - starting in 3rd ch from hook 1. HTR across (49) 2. HTR, ch 1, miss 1, HTRx 45, ch 1, miss 1, HTR, ch 2, turn (47HTR, 2 CH) 3. HTR across ch 1, turn (49) 4. SSx14 sts, ch 2, HTRx23, ch 2, turn (23 HTR) 5. HTR across, ch 2, turn (23) 6. HTRx21, HTRdec, ch 2, turn (22) 7. HTRx20, HTRdec, ch 2, turn (21) 8. HTRx19, HTRdec, ch 2, turn (20) 9. HTRx18, HTRdec, ch 2, turn (19) 10-23. HTR across, ch 2, turn (19) 24. DC even around entire edge of cover. Fasten off- Fold the bottom edge up to the top and fold side flaps in. stitch buttons in line with button holes.
HAMMER
Head - Part A: - Make 4 - Grey - CH 20 1-9 - DC across, ch 1, turn Fasten off - Join each rectangle together along the long side with a row of DC Head - Part B: - Make 2 - Grey - CH 12 1-10. DC in each st across, CH 1, turn (11) Fasten off - Join each Square to the end of the tube made with the rectangles with a row of DC along each edge. STUFF before fully closing Handle: - Brown - 1. CH 15, ss to form ring. in the ch you just ss into Place 6DC, working behind the 15 ch, ss into the top of the 1st dc made (6) 2. (2DC) rp around (12) 7. (2DC, DC) repeat around (18) 4-26. DC around (18) Fasten off - Stuff, center on one of the rectangle sides of the head of the hammer and stitch on.
