Fraulein Bavari Knitting Pattern by Natalia Vasilieva: Experienced Level Sock Design with Magic Loop, Cables, and Twisted-Stitch Knitting Techniques

FRAULEIN BAVARI

BY NATALIA VASILIEVA

Photo ? Anna Hromova SKILL LEVEL: EXPERIENCED. TECHNIQUES USED: MAGIC LOOP, FOLLOWING CHARTS, TWISTED-STITCH KNITTING, TRAVELLING STITCHES, CABLES, JUDY'S MAGIC CAST-ON, PROVISIONAL CAST-ON, STOCKINETTE GRAFTING, LIFTED INCREASES, ADVANCED MODIFIED T-SHAPED HEEL, SHORT-ROWS (ANY METHOD), CABLING WITHOUT CABLE NEEDLE (DESIRABLE).

FINISHED MEASUREMENTS

Sock length: 83/4" (22 cm) to fit foot length 10" (24.5 cm). Sock circumference: 7" (18 cm), to fit foot circumference 83/" (22 cm). Leg length: 87/8" (22.5 cm).

TOOLS AND MATERIALS

· Lana Grossa Merino Superfein (100% superwash merino; 175 yds (160 m) per 50 g): 3 skeins in #586 (purple) · Circular needles US 2%2 (3 mm) or size to get the gauge; at least 32" (80 cm) length ·Cable needle ·Blunt sewing needle

GAUGE

Stockinette: 11 sts x 20 rows = 2" x 2" (5 x 5 cm).

PATTERN NOTES

These socks are worked in Magic Loop technique with beginning of the round (BOR) at the inner side of leg. You may utilize any other technique of your choice preserving BOR position. Socks have picot hem at the cuff, advanced modified T-shaped heel with patterned heel flap featuring short-rows to turn the gussets, and round toe.

DIRECTIONS

Socks are fully charted. These written directions only describe briefly how to follow such charts. (You may find more detailed instructions in special issues of "Verena" magazine about socks.) Each chart represents the whole sock taking vertical repeats into consideration, except for cast-on and bind-off spelled in the directions specifically; most symbols stand for 1 stitch and 1 row/round, cable and twist symbols stand for 2-3-4 consequent stitches in a row/round. Row numbers are placed at the right side of the chart; the important row/rounds are marked red. Also there are "no stitch" symbols: they are needed to keep the chart aligned providing a space for internal increases and decreases; when knitting, just skip those empty spaces. After cast-on, knitting starts at the lower right corner of the chart which corresponds with inner side of the leg. Read rounds (for foot and leg) from right to left. Heel is worked with short-row turns to preserve the continuity of the gusset stitch panels and should be read from right to left on RS rows and from left to right on WS rows: that's why numbers for Rows 74-103 (101) shift back and forth. You can find a photo-tutorial on cuff-down modified T-shaped heel with mock short-rows here: http://www.ravelry.com/projects/skeincharmer/mc-modified-t-shapedheel, to get a general idea on this heel construction.

Toe-up...Version

Cast on 8 sts using JMCO and leaving 8" (20 cm) tail. Holding both working yarn and cast-on tail together, knit 8. Round 1: Knit each double loop as separate stitches = 16 sts. Proceed to Right Toe-up Sock Chart or Left Toe-up Sock Chart respectively. Work Rounds 2-73 for foot, then put instep stitches on hold and make a heel back and forth on sole stitches according to Rows 74-103, and then resume knitting in the round for leg and picot hem to the end of chart. Please note that gusset panels have 8-rounds repeats and should be worked on leg accordingly. This particular arrangement allows to end up all panels simultaneously. Cut the yarn leaving 48" (120 cm) tail, thread the blunt sewing needle and sew open loops of hem lining to purl bumps between the first hem round and the last patterned round from the inside.

FINISHING

Weave in all ends. Block if desired.

Right Toe-up Sock (starts on the next page)

Left Toe-up Sock (starts on the next page)

Key to 1oe-up Lnars no stitch knit 1 on RS, purl 1 on WS knit 1 through back loop on RS, purl 1 through back loop on WS purl 1 on RS, knit 1 on WS yarnover ssk k2tog on RS, p2tog on WS ssk on RS concealing short-row turn if you wish p2tog on WS concealing short-row turn if you wish lifted increase to right: pick up right leg of stitch from row below stitch on left needle and knit it, then knit stitch on left needle lifted increase to left knit 1,then pickup lef leg of stitch two rows below stith on right needle and knit it M1 purl - any purl increase will work (k1 through back loop-yo-k1 through back loop) the same stitch slip 1 short-row turning point on RS short-row turning point on WS conceal short-row turning point conceal short-row turning point or work stitch as i's presented, it won't show behind cable right cable inerease: through back loo, then pick up purl bumps behind 2 letmost sthes on right needleand knit them - 2 sts increased leftcable increase: knit 2 inserting right nedetp intoulbumpsbehind 2 rightmst stithes onlft nedle,then knit those 2 stitches throughback loops - 2 sts increased right cable decrease: slip 2 to cable nedle and hold to back,then knit together through back loop 1 stitch from left needle with 1 stitch from cable need twice - 2 sts decreased leftcable decrease: slip 2 to cable needle and hold to front, then knit together through back loop stitch from cable needle with 1 stitch from lft needle twice - 2 sts decreased right cable 1/1: slip 1 to cable needle and hold to back, k1 through back loop, then k1 through back loop from cable needle left cable 1/1: sip 1 to cable needle and hold to front, k1 through back loop, then k1 through back loop from cable needle right twist 1/1 (worked similar in both cases): slip 1 to cable needle and hold to back, k1 through back loop, then p1 from cable needle left twist 1/1 (worked similar in both cases): slip 1 to cable needle and hold to front, pl, then k1 through back loop from cable needle right cable 1/1/1: slip 2 to cable needle and hold to back, k1 through back loop, then p1, k1 through back loop from cable needle left cable 1/1/1: slip 1 to cable needle and hold to front, k1 through back loop, pl, then k1 through back loop from cable needle right twist 2/1: slip 1 to cable needle and hold to back, k2 through back loops, then p1 from cable needle left twist 2/1: slip 2 to cable needle and hold to front, pl, then k2 through back loops from cable needle right cable 2/2 (worked similar in both cases): slip 2 to cable needle and hold to back, k2 through back loops, thenk2 through back loops from cable needle

left cable 2/2 (worked similar in both cases): slip 2 to cable needle and hold to front, k2 through back loops, then k2 through back loops from cable need

Cuff-down..Version

Picot hem: Using any provisional method cast on 60 sts. Join in the round being careful not to twist the stitches, and knit for 3 rounds. Note: If you use Invisible method, then you may need only 2 rounds. Eyelets round: (\*) yo, k2tog, repeat from (\*) across. Knit 4 more rouinds.. Nnt4ioie1oaias. Retrieve 60 live loops from provisional cast-on. Work next round knitting together 1 stitch from left needle with corresponding live loop. Proceed to Right Cuff-down Sock Chart or Left Cuff-down Sock Chart respectively. Work Rounds 10-73 for leg, then put instep stitches on hold and make a heel back and forth on back-of-leg stitches according to Rows 74-101, and then resume knitting in the round for foot and toe to the end of chart. Please note that gusset panels have 8-rounds repeats and should be worked on leg accordingly. This particular arrangement allows to end up all panels simultaneously. After completing chart cut the yarn, pull the tail through remaining stitches and draw tight.

FINISHING

Weave in all ends. Block if desired.

Right Cuff-down Sock (starts on the next page)

Left Cuff-down Sock (starts on the next page)

Key to Cuff-down Charts

no stitch 日 knit 1 on RS, purl 1 on WS knit 1 through back loop on RS, purl 1 through back loop on WS 口 purl 1 on RS, knit 1 on WS yarnover k2tog on RS, p2tog on WS knit together 1 stitch from left nedle with corresponding live loop from provisional cast-on ssk p2tog k3tog sssk slip 1 pick up and purl inserting right needle tip through both selvedge loops of heel flap from WS to RS so selvedge chain shows on RS pick up and knit inserting right nedle tip through both selvedge loops of heel flap from WS to RS so selvedge chain shows on RS short-row turning point on RS short-row turning point on WS conceal short-row turning point conceal short-row turning point or work stitch as i's presented, it won't show behind cable right cable increase: k2 through back loop, then pick up purl bumps behind 2 leftmost stitches on right needle and knit them - 2 sts increased left cable increas knitinseing right ed pintopurl bumsbehind 2rigmst tithesonlft neede, thn kit thsstitches throughbacklo increased right cable decrease: slip 2 to cable needle and hold to back, then knit together through back loop 1 stitch from left needle with 1 stitch from cable needle t 2 sts decreased left cable decrease: slip 2 to cable needle and hold to front, then knit together through back loop 1 stitch from cable needle with 1 stitch from left needle tv 2 sts decreased right cable 1/ workedsimilainbothcases)slip tocablenedleand hld toback k throughback loo,thnkl throughbackloop frm cable needle lef cable11workd simila inbothcase):slip tcablendle andholdt frnt, k throughbackloop,thnk throughbackloopfrmcable ned rightwist/workedsimilarinbothcases)sli tocableneedle and hold tobackk1 throughbacothnpfromcableneed left twist 1/1 worked similarinboth cases): slp1 tocable needle and hold to front, pl, thenk throughbackloopfrom cable ned right cable 1/1/1: slip 2 to cable needle and hold to back, k1 through back loop, then p1, k1 through back loop from cable needle left cable 1/1/1: slip 1 to cable needle and hold to front, k1 through back loop, pl, then k1 through back loop from cable needle right twist 2/1: slip1 to cable needle and hold toback, k2 through back lops, then p1 from cable needle M left twist 2/1: slip2 to cable needle and hold to front, pl, then k2 through back loops from cable needle right cable 2/2: slip 2 to cable needle and hold toback, k2 through back loops, then k2 throughback loops from cable needle leftcable 2/2: slip 2 to cable needle and hold to front, k2 through back loops, then k2 through back loops from cable needle right twist 2/2: slip 2 to cable needle and hold to back, k2 through back loops, then p2 from cable needle left twist 2/2: slip2 to cable needle and hold to front, p2, then k2 through back loops from cable needle